Deutsch
EnglishPCD Drawing Dies
Reproducible properties, long service life and flexible configuration – ideal for standard and high‑load applications.
Fine‑tuned to your objectives
With a broad selection of grit sizes and core variants, we configure your PCD die exactly for material, process and target quality. Result: stable run, minimal wear, reliable reproducibility.
Manufactured to specification, final‑polished on state‑of‑the‑art equipment and laser‑measured – so your tolerances stay safely within targets.
Diameter0.050 – 12.700 mm
Median grit sizes3 / 5 / 25 / 50 µm
Core variantsVarious core sizes
Applications
- Standard wire drawing
- Automotive
- Steel construction
Strengths
- Isotropic properties
- Cost‑efficient
- Short lead times
Technical specifications
| Parameter | Value | Tolerance | Note |
|---|---|---|---|
| Diameter range | 0.050 – 12.700 mm | ± 0.001 mm | Wider range than natural diamond |
| Grit size | 2 – 30 µm | ± 2 µm | Application‑dependent |
| Surface quality | Ra < 0.2 µm | ± 0.02 µm | Polished surface |
| Hardness (Vickers) | 8’000 – 9’000 HV | ± 200 HV | Depends on grit |
| Drawing angle | 10° – 22° | ± 0.5° | Material‑optimised |
| Reduction angle | 45° – 140° | ± 1° | Process‑dependent |